Ostatnio odświeżony 6 lata temu
The following series use similar coded messaging system:
In case you notice any of the messages, please check their meaning in the table below and try to remove the source of the problem.
Warning Messages |
Code | Description | Cause |
A06 | Battery low | Battery capacity low, or battery remain time low, or battery voltage low |
A09 | Battery disconnect | Battery is disconnected |
A12 | Battery bad | Battery fail |
A14 | Overload | Overload |
A16 | EPO Active | EPO plug is active |
A18 | Over temperature | Over temperature |
A19 | Fan fail | Fan fail |
Failure Messages |
Code | Description | Cause |
F06 | Inverter soft start fail | Inverter fail |
F07 | Inverter voltage too high | Inverter fail |
F08 | Inverter voltage too low | Inverter fail or overload |
F09 | Inverter short | Inverter fail or output short |
F11 | Battery voltage too high | Battery fail |
F12 | Battery voltage too low | Battery fail |
F13 | Battery overcharge | Battery fail or charger fail |
F14 | Overload | Overload |
F15 | Load unbalance | Load unbalance |
F18 | Fan fail | Fan fail |
F19 | Over temperature | Over temperature |