Frequently Asked Question
Advanced ViewPowerPro shutdown settings
Last Updated 4 years ago
|1. Go to the Load configuration page, and then click “Add” button, refer to diagram 1-1.|
|Note: The load means PC.|
|2. Input IP address of load, MAC address, select Poweroff option, input waiting time for load shutdown, and select UPS, then click “Apply” button, refer to diagram 2-1.|
|3. Go to the Event action page, and then select protocol, UPS, and event, refer to diagram 3-1, for example, select “AC failure” event, and then select Send by type, select Load shutdown, UPS shutdown, input waiting time for load shutdown, Load shutdown reminder, Popup dialog before shutdown, warning dialog interval, waiting time for ups shutdown, and then click “Apply” button, refer to diagram 3-2.|
|4. Open the “ShutdownWizard” software. |
NOTE: ViewPower use UDP port 31234 to send shutdown command, and ViewPower Pro use UDP port 41234, please open these ports on firewall.
|1. Please enter the email server and add the receiver email to list, and then click apply button to save |
NOTE: Please make sure that the email server can work normally.
|2. Select UPS type |
|3. Select UPS which one is monitoring |
|4. Select one event, and then choose a receiver email, finally click apply button to save |